Coffee Bean Gold Plated Chain Necklace Luxe

How to Layer Necklaces (and Style Everyday Jewellery)

To layer necklaces well, choose two or three chains in different lengths, about 5cm apart, so each one sits on its own line. Start with a short chain at the collarbone, add a pendant a little lower, then finish with a longer chain. Mix textures, like a fine chain with a bolder link, and keep one piece as the focus.

What necklace lengths should you layer?

Chain length is the secret to a layered look that does not tangle. Here is roughly where each length sits on most people, although it will vary a little with your neck and build.

Length Where it sits Good for
36cm (14in) High on the neck, choker style The top layer of a bold stack
40 to 41cm (16in) On or just above the collarbone Fine chains, small charms, the first layer
45 to 46cm (18in) Just below the collarbone Birthstone pendants, the most versatile length
50cm (20in) A few centimetres below the collarbone Statement chains and the middle or lower layer
55cm (22in) Around the neckline of most tops Pendants over higher necklines
61cm (24in) Mid chest A long final layer, or worn alone over knitwear

Every product page lists the chain length under Dimensions, and an extender chain gives you a little room to adjust.

How do you layer necklaces without them tangling?

  • Leave a gap: around 5cm between each chain keeps them apart.
  • Vary the weight: a heavier chain at the bottom anchors the stack and stops the finer ones twisting around it.
  • Mix textures: pair a smooth snake or box chain with a ball bead, rope or paperclip link.
  • Stop at three: three layers look considered. More can work, but it is harder to keep tidy.
  • Fasten in order: put the shortest on first and the longest on last.

Can you mix gold and silver?

Yes, and it is an easy way to make everyday jewellery feel personal. The trick is to make it look intentional. Repeat each metal at least twice, for example gold chains with a silver pendant and silver huggies, or wear a two tone piece that links the two. If you prefer one metal, choose by what you wear most. Our guide to gold plated, vermeil and gold filled explains how each finish wears.

How do you layer a pendant with chains?

Let the pendant be the star. Wear it at 45 or 46cm, then add a fine chain above it at around 40cm and, if you like, a slightly bolder chain below. Keep the other chains plain so they frame the pendant rather than compete with it. A birthstone pendant in the middle of the stack is a lovely way to carry someone close.

How do you create a birthstone stack?

A birthstone stack tells a story: your own stone, your children's, or the months that matter to you. Add small birthstone charms to a chain with an openable clasp, or layer two or three fine birthstone necklaces at different lengths. Keep the chains in the same metal so the colours of the stones stand out. Find each month's stone in our birthstones by month guide and what each one means in the Meaning Guide.

How do you stack earrings with huggies?

Huggies are small hoops that sit close to the lobe, which makes them perfect for stacking. If you have more than one piercing, wear a slightly larger hoop or stud in the first hole, then a huggie or two above it, getting smaller as you go up. A birthstone huggie adds a touch of colour, and a plain gold or silver huggie keeps things calm. Our birthstone huggies come in every month.

What is a capsule jewellery wardrobe?

A capsule jewellery wardrobe is a small set of pieces that work together, so you can get ready without thinking. A good starting point:

  • A fine everyday chain, around 40 to 45cm
  • A pendant with meaning, such as your birthstone
  • A bolder chain for layering or wearing alone
  • Plain hoops and a pair of huggies
  • A slim bracelet or bangle that stacks

Choose one main metal, add one or two pieces in the other, and build from there.

What jewellery is appropriate for work?

For the office or video calls, keep it simple and quiet. A single pendant or two fine layered chains, small huggies or studs, and one bracelet that does not knock against the desk all work well. Save the bolder chains and longer layers for evenings and weekends, or wear one on its own over a plain jumper.

Layering pieces to start with

Shop all gold plated layering necklaces, chain necklaces and birthstone necklaces. To keep your stack bright, read how to clean and care for your jewellery, and for sizes and delivery see our FAQ.

How do you layer two chains of the same length?

If you love two chains that are the same length, they will sit on top of each other. Wear the first as normal. On the second, hook the clasp into a link a few centimetres further along the chain instead of its ring. It now sits higher, and the two look made for each other. If one has a pendant, make that the longer one so the pendant's weight keeps it in place.

How do you stop layered necklaces tangling when you travel?

Thread each chain through a drinking straw and fasten the clasp outside it. It will come out of your bag exactly as it went in. A small lined box, such as our jewellery organisers, keeps each piece apart.

Which necklace suits which neckline?

  • Crew neck or T-shirt: short and just above the neckline, or long enough to fall well below it, never right on the edge.
  • V-neck: a pendant that drops into the V and follows its shape.
  • Scoop or square neck: your layering moment, with two or three chains at different lengths.
  • Shirt: undo one more button and wear a fine chain or a pearl. Buttoned to the top, skip the necklace and choose earrings and a wrist stack.
  • Polo neck or chunky knit: a longer pendant over the knit, or let earrings do the work.
  • Strapless or off the shoulder: a bare neck or one fine chain, with bigger earrings.

How do you stack bracelets?

Start with one piece that has a little presence, such as a tennis bracelet, a birthstone bangle or an evil eye bracelet, then add one or two finer chains around it. Mix textures, a smooth bangle with a rope or paperclip chain, and stop at three or four so they sit comfortably. If you wear a watch, keep the stack on the other wrist or let the watch be the anchor.

How do you put on a bracelet by yourself?

  1. Slide a bobby pin through the ring at the end of the bracelet, the end without the clasp.
  2. Hold the pin flat against the inside of your wrist with your thumb, so the bracelet cannot slide away.
  3. Wrap the bracelet round, open the clasp with your free hand and hook it onto the ring.
  4. Slide the bobby pin out.

Find stacking pieces in everyday jewellery, chain bracelets and birthstone bangles, and a pendant to anchor a necklace stack in our statement birthstone pendants.

Quick answers

What length necklaces should I layer?

A classic three layer stack is 40cm, 45cm and 50cm. Keeping about 5cm between each chain helps them sit neatly and stops them tangling.

Where does a 45cm necklace sit?

On most people a 45cm (18 inch) necklace sits just below the collarbone. It is the most popular length for pendants.

Can I mix gold and silver jewellery?

Yes. Repeat each metal at least twice, or add a two tone piece, so the mix looks intentional.

How many necklaces should I layer?

Two or three is the sweet spot. Vary the lengths and textures, and let one piece, such as a birthstone pendant, be the focus.

What are huggie earrings?

Huggies are small hoops that sit close to the earlobe. They are comfortable for everyday wear and ideal for stacking in multiple piercings.

How do you put on a bracelet by yourself?

Slide a bobby pin through the ring at the end of the bracelet, hold the pin flat against the inside of your wrist with your thumb, wrap the bracelet round, hook the clasp onto the ring, then slide the pin out.

How do you stack bracelets?

Start with one statement piece, such as a tennis bracelet or bangle, then add one or two finer chains in different textures. Keep to one metal, or repeat each metal at least twice if you mix.

Can you layer two necklaces of the same length?

Yes. Fasten the clasp of the second chain into a link a few centimetres along, so it sits higher than the first.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


You may also like

View all
Example blog post
Example blog post
Example blog post